---
title: "Annova Field2GIS | Desktop App That Turns Utility Field Sheets into GIS Data"
description: "Annova Field2GIS is a native desktop app that turns work order sheets, scans and photos into GIS-ready attributes and geometry, fully offline. Shapefile, GeoPackage, GeoJSON, CSV and DXF."
url: https://annovatechnologies.com/field2gis-ai.html
last_updated: 2026-11-16
---

Product by Annova Technologies  

Annova Field2GIS · Desktop app for utilities

# From Field Paper to GIS.

Field2GIS turns work order sheets, scans and photos into GIS-ready attributes and geometry, on your own computer. No uploads, no cloud, no AI model guessing at your network.

[Book a demo](https://annovatechnologies.com/contact.html?product=field2gis) · [See how it works](#how) · [▶ Watch the video](#video)

**Fully offline**: Native Windows desktop app; nothing is uploaded

**PDFs, scans, photos**: Vector PDFs, scanned sheets and phone photos

**5 export formats**: Shapefile, GeoPackage, GeoJSON, CSV and DXF

**Electric utilities**: Built for electric; ready for gas, water and telecom

The problem

## Your network changes in the field. Your GIS finds out months later.

Every pole set, transformer swapped and span replaced ends up on a work order sheet. Getting it into GIS is still slow, manual work.

### Digitising backlogs

Crews close jobs faster than GIS technicians can redraw them. Sheets pile up, and the network model drifts away from what is in the ground.

### Retyping by hand

Asset IDs, pole classes, kVA ratings and span ends are keyed in from paper. Every manual entry is a chance for a slip that surfaces during the next outage.

### Scans nobody can use

Decades of records sit as scanned PDFs and phone photos: crooked, shaded and unreadable to a GIS.

### Data that can’t leave the building

Network drawings are sensitive. Many utilities cannot send them to an online conversion service at all.

How it works

## Four steps from sheet to GIS layer.

### Open your field data

Drop in a vector PDF, a scanned PDF, a scan or a phone photo, or point Field2GIS at a whole folder. Choose attributes, geometry or both.

### Field2GIS reads the sheet

It picks up the work order number, date, crew, circuit and location from the title block, then turns every note into one record: install, remove, replace, relocate, transfer or update attributes.

### Every asset lands on the map

Positions come from coordinates on the sheet, your existing GIS records, the georeferenced drawing or the pole a device hangs on. Anything it cannot place is listed, never guessed.

### Review and export

Check the flagged rows, correct any cell, then export GIS layers and a PDF report in the coordinate system you work in.

Sheet view: the field sketch read into one record per change.

Attribute table: action, asset IDs, span ends and specifications.

Product video

## See Annova Field2GIS in action

Capabilities

## Everything on the sheet, ready for your GIS.

Field2GIS reads what your crews wrote and what they drew, cleans it up and writes it out in the formats your GIS already uses.

### Read the sheet

- **Attribute extraction.** Each note becomes one record with action, asset type, asset ID, the asset it replaces, the structure it is mounted on, span ends and specifications such as height, class, kVA, phase, voltage, conductor and fuse. The original sheet text is kept next to every row as evidence.
- **Geometry extraction.** Conductors, poles, transformers, lots, buildings and easements are traced from vector PDFs and scans. Dashed lines are told apart from solid ones, a crossed-out symbol is marked as removed, and the sheet’s own legend sets what each colour and line type means.
- **Only real map features.** Borders, title blocks, callout boxes, leader lines and text underlines are left out automatically, with the reason recorded for each piece.
- **Automatic scan clean-up.** Before a scan is read, Field2GIS straightens it (up to 10°), evens out yellowed paper and shadows, removes scanner grain and sets clean levels, while keeping the ink colours. Phone photos of a screen have their dot pattern and glare removed too.

### Put it on the map

- **Control-point placement.** Place a drawing from coordinates written on the sheet, from assets in your GIS records that are labelled on it, or from points you click and type in. Three or more points also correct a rotated scan. The fit error is shown in metres, and points that disagree with the rest are set aside automatically.
- **OpenStreetMap base map.** See your data over the streets with one click. Only tile numbers are requested, never your data, and tiles are cached for offline use. Sites with no internet can load a saved base map file instead.
- **Road centre lines.** Streets drawn as areas or as two edge lines come out as centre lines in their own roads layer, the way GIS keeps them.
- **Uses your GIS records.** Load your existing assets as a CSV to place rows and to fix one-character OCR slips in asset IDs.

### Clean and connect

- **Clean topology.** Line ends snap to the pole or symbol they stop at, broken lines are joined, duplicates and slivers are removed, and spans are split at every pole so each one runs pole to pole and keeps its end IDs.
- **You stay in control.** Low-confidence rows are flagged for review, every cell can be edited, and your work can be saved and reopened later.

### Deliver it

- **GIS-ready export.** Shapefile (also zipped), GeoPackage, GeoJSON and CSV, in WGS 84, the local UTM zone or Web Mercator. Layers cover work order points and spans, drawing points, lines and polygons, and roads.
- **DXF for drawings with no map position.** A vault detail or sketch with no coordinates is still traced and written as a DXF in sheet units, ready for CAD or for placing later in QGIS or ArcGIS.
- **PDF report.** A printable record of each extract: sheet details, summary figures, an overview map with scale bar, the full attribute table with rows to review shaded, rows not placed, and the control points with their fit error.
- **Batch processing.** Process a whole folder and its subfolders in one run. Each input gets its own output folder, and a combined output holds every layer together with one report.
- **CSV to GIS.** Correct the exported table in Excel and turn it straight back into GIS layers, without reading the sheets again.

Accuracy

## Measured, not promised.

We test Field2GIS against sheets where the true position of every asset is known. Here is what it delivers on our demo work orders.

**Within 8 cm**

Every labelled asset on the demo PDF work order sheet, placed from the sheet alone

**Under 1 m**

Fit error on demo scans, including scans turned 2.5° with shading and grain

**14 of 14**

Work order notes read on each demo sheet

**0.99**

Median overlap between converted building footprints and the real ones

Before automatic clean-up, the same turned and shaded scans landed up to 21 m off or could not be placed at all. Field2GIS now straightens and evens them out first, so all three place within a metre.

Measured on Annova’s demo work orders for Royal Oak, Michigan and Lake Arrowhead, California, built on real OpenStreetMap roads and buildings with a synthetic electric network. Results on your sheets depend on their quality and layout; ask us for a pilot on your own records.

Offline by design

## Your data never leaves your machine.

Field2GIS is a native desktop app. Reading and converting field data needs no network connection, and the app switches off its own network access when it starts.

There is no AI model and no cloud service: text comes from the PDF itself or from local OCR, attributes come from rules you can edit, and geometry is traced on your computer.

### What stays private

- **Nothing is uploaded.** Sheets, tables and drawings stay on your PC.
- **Optional base map only.** The OpenStreetMap base map is off until you switch it on, and it only ever requests map tiles. For fully air-gapped sites, load a base map file instead.
- **Rules you can read.** Every keyword, ID pattern and colour meaning lives in one editable rules file, so you can see exactly why a row was read the way it was.

Licensing and services

## Simple licensing. Expert help when you need it.

### Licence

- **Annual subscription per licence.** Each licence includes an agreed number of documents a year.
- **Patch updates every six months.** New sheet types, accuracy improvements and fixes, included with your subscription.
- **Easy Windows install.** A one-click installer puts Field2GIS on the desktop. After that it runs fully offline.
- **Volume pricing for teams.** Talk to us about multiple licences.

[Request a quote](https://annovatechnologies.com/contact.html?product=field2gis)

### Services

- **Tuned to your sheets.** We collect a sample of your work orders, tune the reading rules to your layouts and abbreviations, and measure accuracy with you before handover.
- **Backlog conversion.** Send us your archive of sheets and we deliver GIS layers ready to load.
- **GIS data QA.** Checks on attributes, positions and topology before data goes into your network model.
- **Custom GIS tools.** Workflows built around your systems and standards.

[Talk to our team](https://annovatechnologies.com/contact.html?product=field2gis)

FAQ

## Frequently asked questions

Which files can Field2GIS read?

Vector PDFs, scanned PDFs, scanned images and phone photos of a sheet. Vector PDFs are read exactly; scans and photos are cleaned up first and read with local OCR.

Does it need the internet?

Only once, to install. Reading, converting and exporting run fully offline. The optional OpenStreetMap base map needs a connection while it is switched on, and a saved base map file works without one.

Does it use AI?

No. There is no AI model inside Field2GIS. It uses the PDF’s own text or local OCR, plus reading rules you can open and edit, so the same sheet always gives the same result.

What if a row can’t be placed on the map?

It goes in a separate list of unplaced rows instead of being guessed. You can add control points, load your GIS records or type a position, and the row is placed straight away.

What if my company writes its sheets differently?

All the reading rules live in one editable file: action words, asset types, ID patterns, specifications and colour meanings. Our team can also tune them to your sheets for you.

Which industries is it for?

It is built for electric distribution utilities, and the same approach works for gas, water and telecom records.

Which coordinate systems can I export to?

WGS 84, the UTM zone of the work area, or Web Mercator, with matching projection files.

Which version is this?

This page describes Annova Field2GIS 1.7.2. Subscribers receive patch updates every six months.

## Bring decades of field records into GIS.

Clear your digitising backlog and keep the network model current, without a single sheet leaving your building. See Field2GIS work on your own work orders.

[Book a demo](https://annovatechnologies.com/contact.html?product=field2gis) · [Request a pilot on your sheets](https://annovatechnologies.com/contact.html?product=field2gis)
